Closed-loop laser power control system for Cladding, LMD and other DED techniques
Continuous monitoring of melt pool dynamics and geometry.
Ensures quality and repeatability.
Compatible with most laser heads.
Compatible with a wide range of materials.
Easy mechanical integration.
Helps to reduce CO2 emissions.
CLAMIR: LMD/DED processes
Continuous control of the laser
Avoids overheating of the part under process and allows a continuous and high quality manufacturing process.
Use of CLAMIR
Reduces rates of defective parts, material reduction cost up to 60% and saves 50% more energy than uncontrolled processes.
Constant laser power causes overheating and lack of adherence to the base material.
aser power is closed loop controlled in real time using the information extracted from the melt pool IR images.L
CLAMIR: Cladding processes
To the base material due to excess of laser power application (average reduction of dilution: > 40%)
Allows continuous processing
|Continuous melt pool measurement
Accurate closed-loop control of the laser power
|Configuration S/W friendly user interface
Easy set up
Melt pool width Laser power Infrared image Laser status
|On-axis optical system monitoring melt pool geometry
|Laser head optical path needs IR transmission ( > 1.1 um )
|Compact system – Embedded IR camera, processor and control
|Integration in the laser head using an existing optical port
|Sensor head with embedded real-time processing electronics and connectors
Software for system configuration
Infrared emmiter for initial focus and optical calibration
|LMD process (Laser Metal Deposition) / Laser Cladding Processes
|Transmission of infrared radiation (above 1.1 um) from the process area to the optical port is required. *
|Steel powder, Stain steel powder, Stelite powder, Inconel, others.
|LASER POWER CONTROL
|Analog signal control, 0 VDC – 10 VDC
|DIMENSIONS (mm) / WEIGHT
|88 mm x 60 mm x 92 mm / 0.5 kg
|24 VDC, 6W
|According clients specifications and needs. Several optical configurations available.
|IP67 rated mechanical enclosure with embedded heatsink
Embedded waterblock for air / water cooling
|C-mount thread with counterthread for tight adjustment
|VPD PbSe camera, 64×64 pixels (pixel size: 50 microns)
MWIR response (1 -5 um), frame rate 1000 images per second
|Gigabit Ethernet (RJ-45)
|PC with processor i5, RAM memory: 8 GB
Hard disk available: 1 GB, O.S.: Windows 10 or later (32/64 bits)
|Selectable modes: Automatic, Manual
|Selectable process configuration: Tracks, Continuous
Initial laser power
Track length (Tracks mode)
|2x digital input, 2x digital output (multiple functionalities)
Process data logging
* The performance of the system may be limited if additional optical components are installed in the optical path.